Self levelling epoxy

[Clive S]

The System that we seem to use over here is the Wests System 105 / 209 http://www.westsystem.com/ss/use-guides/
it is a very slow curing hardener about 10 hours but you have to be carful with the temperature.

[samsagaz]

Impossible to get that brand in argentina.
looks like need to find another way to get an smooth surface to bolt the rails

[Clive S]

Impossible to get that brand in argentina.
looks like need to find another way to get an smooth surface to bolt the rails

You have not said what size machine you want to build and what you would like to cut with it?
Do you have a design in mind?

[samsagaz]

well i made like 20 designs in the last years, the main problem that i have is that some THK rails SR20 that i purchased have rust and the carts dont runs smooth, dont know if are the carts that are fault or the rust. Btw, i have an SR25 ones (new ones) and runs smooth in another rails

I made like 10 designs in the last years (i purchased the parts mmm like 6-7 years ago so i want to make something and use at least some of the pcs that i already have.

I dont have enough money this time..

Btw, i want to cut mainly wood and aluminium. I want to make some speakers cabinets (wood/mdf) and aluminium to build parts for smallest machines, maybe for PCB routing/milling. and to make amplifiers cabinets

Modified the design many times, but will draw something soon (but if dont found the epoxy in my country looks like will needto think in another design)

Sorry for my english