Engraving aluminium - recommended tool

[ptjw7uk]

In post 16 d4cnc is saying 'once the tool is spinning, - I thought this was about a drag engraver and as such shouldn't spin.

Peter

[Boyan Silyavski]

In post 16 d4cnc is saying 'once the tool is spinning, - I thought this was about a drag engraver and as such shouldn't spin.

Peter

He is talking about his mmrace spring loaded toolholder


as far as engraving and color filling better read this, but in short :

"As a rule of thumb, with characters up to 1/4" high, engrave to a depth of .010" -.012". On larger characters, it is advisable to go .015" - .020" deep depending on theline width and filling technique used."

[John S]

Wilson,
Check your PM's

[evildrome]

Hi John,

I have replied but if you don't see the reply feel free to call me on 07711 zero two six six five three

Cheers,

Wilson.

[Billythefish]

Laser works best for engraving aluminium :-)

cheers,
Billy

[evildrome]

What size of laser do you need?

[Billythefish]

Mine is 10w, 1023nm, galvo. You can do it with a 6w blue fibre laser on an xy gantry home made. Size is not really the issue, beam quality is more important..