Step-Four problems

[Pylonracer]

Hello Bazzer
the early Stepfours with the CF1 and CF2 electronic boxes work fantastically well on Mach 3, in fact Mach 3 transforms the machine into a usefull little piece of kit

I produce G code with BobCAD V29 and do 2.5D and full 3D machining on the Stepfour, cut sizes and machining stratergies need to be well thought out but the results are pleasing.

The only problem is that there is no control of the spindle using the Stepfour/Mach 3 combination, I am going to work on this in he New Year. Currently the spindle is manually controlled.

Regards

Barrie

[fburmeister]

Hello Bazzer
the early Stepfours with the CF1 and CF2 electronic boxes work fantastically well on Mach 3, in fact Mach 3 transforms the machine into a usefull little piece of kit

I produce G code with BobCAD V29 and do 2.5D and full 3D machining on the Stepfour, cut sizes and machining stratergies need to be well thought out but the results are pleasing.

The only problem is that there is no control of the spindle using the Stepfour/Mach 3 combination, I am going to work on this in he New Year. Currently the spindle is manually controlled.

Regards

Barrie

[Pylonracer]

Fburmeister

What is your post about? I dont understand as it is just my post exactly?

regards

Barrie

[toninox]

Plyonracer, could you please share mach3 parameters? i really can't configure it

if someone need i can share the milling sofware v4
rev. 6 of sept 0406
that is great for 2 and 2,5d milling/engrave jobs but doesn't support 3d modules
it works in win98 system

[Pylonracer]

Plyonracer, could you please share mach3 parameters? i really can't configure it

if someone need i can share the milling sofware v4
rev. 6 of sept 0406
that is great for 2 and 2,5d milling/engrave jobs but doesn't support 3d modules
it works in win98 system

Hello Toninox

I will get the settings recorded and will post them for you.

Regards

Barrie

[rpbenito]

Hello Toninox

I will get the settings recorded and will post them for you.

Regards

Barrie

Hi Pylonracer!

Is there any chance that you could share the settings with me, please? I will really appreciate that! I've got a old Basic 540 and it's driving me nuts! :D I can get it work but I'm not sure all the settings are right.

Thanks!

Regards.
Raul

[toninox]

Hi Pylonracer!

Is there any chance that you could share the settings with me, please? I will really appreciate that! I've got a old Basic 540 and it's driving me nuts! :D I can get it work but I'm not sure all the settings are right.

Thanks!

Regards.
Raul

at the end Pylonracer never post anything
if you need the old original software in win98 / msdos and relative parameters. write me lucio @ reciclandino . com