Interesting Kickstarter project.

[Lee Roberts]

You can download a bootable CD image with Linuxcnc and you can buy a very good second hand desktop PC for £50.
I'm a massive fan of component systems where all your eggs ( Pounds Stirling ) are not in one basket ;-)

- Nick

And if you want to, you can boot from a USB stick as your hard drive giving you more towards an SSD hard drive with out the expense.

I watched this last night, if your a geek (I like to pretend I'm one) you'll enjoy it, it's the first quarter mostly as he's talking about LinuxCNC and the typical XYZ cutting machines we build, BUT he also covers other stuff that I think would be good for a few here to listen to, Linux not really being real time and so on.

Something else I want to say to people out there is, don't let the "Linux" in LinuxCNC put you off because it's not all about terminals, servers, typing commands and all the other things you would associate with "Linux"...

...what you on about yes it is, yea but only if you want to get into that side of it, once your booted up, your looking at a GUI in the same way you would be looking at Mach...if you wanted to you could also boot with a/the GUI for Linux, once booted up (like a windows machine) your looking at a traditional desktop your used to seeing, OK it's not cosmetically identical but it's the samething, so off you go using it like any other PC (Windows/Apple).

Final thoughts...
Watch the video, drop your thoughts on the associations, then go have a look at what exactly it is you'll be using with LinuxCNC because it's not geek (unless you want that).

https://youtu.be/LdJ8xjCJIGo

.Me