Hi, just run across your thread. I also in the last 2 weeks picked up a 2000ish novamill and with some careful reading on the web of various threads and a little trial and error on mach3 settings combined with a princely sum of around $60 I have the novamill up and running on mach3 using the existing controller hardware.


X,Y,Z full motion
homing switches working
e stop working both soft and via panic button on the machine
spindle on/off
spindle pwm speed control

I already had an older dell desktop with a printer port and mach3 as i have a 4x8 cnc router.

let me know if you need any help if you want to go the same way. I may eventually replace the steppers and boards with upgraded units but for now it was cool to get it running for minimal cost.