Denford Microrouter V4

[Neale]

I use Vectric VCarve which does a good job of v-carve toolpaths, and is aimed at woodworkers rather than engineers. It ain't cheap, though. Vectric offer a free trial copy, although as far as I remember it will give a good simulation onscreen of the finished work but will not actually produce gcode. You need the full paid-up version to do that. Certainly at the time I was looking, 2-3 years or so ago, I couldn't find anything else that did such a good job. For the kinds of things you seem to make, VCarve would do pretty well, but as I say, you do have to pay for it. I would be interested to hear if anyone knows of an equally good or better v-carving CAM package that doesn't cost an arm and a leg.