Hi Irving,

I was just logging on to PM you that I'd received my PSU this morning, when I found this thread! Thanks for the review!

Looks like a nice unit - I've had the covers off, but didn't get it down to the same state of undress as you...

The datasheet shows that if the inhibit line is left at 0V the PSU will sit at 42.8V (out of regulation). You also mention that it might turn off at some point, but I can't see that mentioned in the data - is this from experience? I'm thinking of just trying (leaving it plugged in in the corner) it to see what happens... You'll probably remember that I need 50V max for my drivers (aiming at 42 to 45V).

Need to get some 4.8mm spade connectors first though - I only have 6.3mm and they're not secure on the terminals...

Tom