Quote Originally Posted by Clive S View Post
We need to know what type of cable you require, it is quite normal to use 4 core cy cable as: http://www.csecables.com/flexible-co...creened-cable/ 0.75mm or 1mm

Make sure you connect the cables core to core and not get them crossed the cables cores are black but do have numbers on them
Hi Clive,

Yes, that is the cable. The large flying socket fitted on my cables is the XLR 4 pin type that screws into a panel mounted plug on the cnc controller. I cannot find any screw type flying plugs that fit. I may have to replace all the cables :(

Cheers

Gary