Denford router - Brushed router too brushless spindle - Help and advice please

[Tom B]

Solution found.

[JAZZCNC]

Solution found.

Tom I know someone who as porter cable router that came off same machine if your interested.

[magicniner]

Solution found.

That's cool, you could share the details, it may help others with a similar problem at a later date ;-)

[Tom B]

That's cool, you could share the details, it may help others with a similar problem at a later date ;-)

I found all the circuit diagrams and opened the machine up and had a look. It will work on paper and have ordered the necessary parts, once i have it installed and have it running i will make a write up and share :)