Bridgeport Manual to CNC conversion...

**Chaz** · 25-01-2018

Congrats, any vids?

**Davek0974** · 25-01-2018

Thanks, hope to get a vid or two at the weekend - evenings are just too short :)

Just need to iron out a bug in the index homing, might be noise from the rough lash-up i'm using or may need to move the home switch a little.

**Davek0974** · 28-01-2018

Originally Posted by Chaz

Congrats, any vids?

Here you go - bit rough as hard to video while pushing buttons :)

https://youtu.be/npuQk2Ao7UY

Also tested my homing accuracy...
https://youtu.be/55VjHRgzt9s
https://youtu.be/SUt1NiHZYIg
https://youtu.be/fLXJXyGhipw
https://youtu.be/sGrpzJVhkSk

Can't ask for better i think :)

**Chaz** · 28-01-2018

Nice, do you have a high speed spindle fit to the machine too? If so, any pics of the mounting please? I have a friend that will be interested to do the same.

**Davek0974** · 28-01-2018

Originally Posted by Chaz

Nice, do you have a high speed spindle fit to the machine too? If so, any pics of the mounting please? I have a friend that will be interested to do the same.

Here you go...
http://www.machsupport.com/forum/ind...32513.500.html