Hybrid View
-
25-05-2016 #1
It looks good! I have not built my own router yet, still planning ;) So you have alot more experience thanks me, but have you tried to cut aluminium with this design? From what Ive read the tall thin gantry uprights are more suitable for wood and plastic? Best of luck to you!
-
25-05-2016 #2
-
25-05-2016 #3
-
25-05-2016 #4
Amazing how someone videoing a machine test completely omits the machine, could have been any machine and not necessarily a very good one in video, nothing suggests that this same machine, or that it is stable, could be the gantry swings like a pendulum so you don't want to show it even long shots take care not to show enough of machine to identify it.
-
25-05-2016 #5
-
25-05-2016 #6
-
25-05-2016 #7
-
iD2 What are the yellow bits for on the back of the motors? if they have any weight they will certainly compromise the machine with the extra inertia.
..Clive
The more you know, The better you know, How little you know
-
26-05-2016 #9
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Aluminum finish
By Boyan Silyavski in forum Metal Finishing TechniquesReplies: 3Last Post: 07-09-2014, 07:32 PM -
Aluminum router build - Could use some input
By Tumblebeer in forum Gantry/Router Machines & BuildingReplies: 17Last Post: 01-09-2014, 09:48 PM -
NEW MEMBER: where to buy aluminum extrusion
By troyboy1 in forum New Member IntroductionsReplies: 3Last Post: 21-07-2014, 01:52 PM -
tool for aluminum on uk
By edgas10 in forum Tool & Tooling TechnologyReplies: 1Last Post: 26-04-2011, 11:23 AM
Bookmarks