Quote Originally Posted by Lewywri89 View Post
I couldn't fault the leadshines to be fair I just thought I'd get the geckos as there is so much info on them so I now have 4
the leadshine may come in handy for another project, just wanna get the plasma working
the Psu from zapp only has 3 outputs
yes I have two motors on 1 axis and yes I'm sure the pdmx supports slaving

doing some research and it looks like for these motors 62v is the right Psu
is this correct?
I think you will find that all the outputs are connected together so you can just connect two to one of the outputs.
If you read the Gecko manual it says that the motor voltage can be up to 20 time the rated voltage on the motor ie. 75.6V