Motor tuning mm for plasma

[whensparksfly]

Do you do it manually in the motor tunning drop down or do it in the setting move x 20 how far did x move

Sent from my SM-G361F using Tapatalk

[magicniner]

Do you do it manually in the motor tunning drop down or do it in the setting move x 20 how far did x move

Sent from my SM-G361F using Tapatalk

I've never used the drop down motor tuning do-dad, I've always started manually from the steps per turn for the steppers, screw pitch etc. then measured some moves, starting small then getting bigger, adjusting the tuning figures to correct over/under size moves

[lucan07]

Mach3 has an auto calibration feature on settings page just install a recent version!

[magicniner]

It's worth asking on the Mach3 forum which version is best for your application, latest is not best for all applications, new bugs were introduced as old ones were fixed.