Purchasing new parts for new build.

[Clive S]

Found the Drivers that i talked about a few post ago. Leadshine AM882 manual say that support 80V max, looks like its the only stuff that purchased that can use in the machine

The Am882 are good drives but don't run them at the max voltage as Jazzcnc has said 70V is good.

In post #13 you said you have 1605 ball screws you can use those OK.

Start leaning some CAD Can you get Sketchup or Fusion360 and get a drawing made to start?

[samsagaz]

The Am882 are good drives but don't run them at the max voltage as Jazzcnc has said 70V is good.

In post #13 you said you have 1605 ball screws you can use those OK.

Start leaning some CAD Can you get Sketchup or Fusion360 and get a drawing made to start?

Clive, used sketchup to draw the images that i post. Still searching for complete design/log to get more ideas, at least now skip to use IPN/UPN