extrusion models from jpeg drawings

[stirling]

That is an ITEM profile. If you nip over to their site they have CAD downloads freely available. Here's the one you show in .dxf to get you going.

[JAZZCNC]

You'll find most stuff on trace parts. May need to register but it's free.

http://www.traceparts.com/

[dazza]

thanks all
I managed to get the dxfs from kjn in the end.thats some site jazz..i did run the reference numbers through the search bar on there but nothing came up in results...but very useful.

[JAZZCNC]

i did run the reference numbers through the search bar on there but nothing came up in results...but very useful.

ITEM are on there so maybe with bit more search you'd find what you wanted.