Hybrid View
- 
	11-06-2016 #1
First, I'm not sure why one company would give press releases on another companies products.
Second, why would they. Companies don't make new products to be compatible with old technology, unless that's there specific market.
Go play with your Linux box and stop whining about Windows, since you obviously have an agenda.
There's really very little difference between them. Except that Microsoft screwed up the interface in 8, but you could fix it in 5 minutes, if you wanted to. I've been running 8.1 for 18 months, and have zero problems with it. I was hesitant to update to 10, until I got a new laptop with 10. It's almost the same as 8, but yes, it's faster.The w7, 8 and 10 are very stableGerry
______________________________________________
UCCNC 2022 Screenset
Mach3 2010 Screenset
JointCAM - CAM for Woodworking Joints
 - 
	11-06-2016 #2
http://www.tomshardware.co.uk/micros...ews-52211.html
http://www.theverge.com/2016/1/16/10...essors-skylake
If you read you will find that what Microsoft have taken the decision to do is force early obsolescence on their older operating systems within their stated support life by ensuring the processors in new PCs will not run them.
It's not referred to in the industry as a Wintel platform for nothing, they might not be married but they are definitely in bed ;-)
Comparing a new version of Windows on a new laptop to an old version of Windows one on an old laptop is like comparing a new fuel in a new car to an old fuel in an old one, meaningless, of course something in newer faster hardware will be faster!
- Nick
Mach3 on W7 BTW, no cigar! ;-)You think that's too expensive? You're not a Model Engineer are you? :D
 - 
	11-06-2016 #3What percentage of PC buyers intend on running an older OS on their new PC? I'd think that it's much less than 1%.If you read you will find that what Microsoft have taken the decision to do is force early obsolescence on their older operating systems within their stated support life by ensuring the processors in new PCs will not run them.
Except that I'm comparing an $800 laptop running 10, to a $3000 desktop running 8.1.Comparing a new version of Windows on a new laptop to an old version of Windows one on an old laptop is like comparing a new fuel in a new car to an old fuel in an old one, meaningless, of course something in newer faster hardware will be faster!
I would say that most new Mach3 users in the last 3-5 years are running 7, and a lot are now running Mach3 on 10.Mach3 on W7 BTW, no cigar! ;-)Gerry
______________________________________________
UCCNC 2022 Screenset
Mach3 2010 Screenset
JointCAM - CAM for Woodworking Joints
 - 
	11-06-2016 #4
Microsoft state
;-)A device may not be able to receive updates if the device hardware is incompatible, lacking current drivers, or otherwise outside the Original Equipment Manufacturer’s (“OEM”) support period.Last edited by Lee Roberts; 11-06-2016 at 04:21 PM. Reason: Formatting
You think that's too expensive? You're not a Model Engineer are you? :D
 
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
- 
  
CNC Project - Guitar Neck (and the rest if I can get away with it)
By Washout in forum Woodworking Project ShowcaseReplies: 77Last Post: 28-01-2018, 10:45 AM - 
  
Replacing windows/painting
By Ross-MTV in forum Machine DiscussionReplies: 6Last Post: 15-11-2015, 02:27 PM - 
  
NEW MEMBER: Back after a little rest
By bogstandard in forum New Member IntroductionsReplies: 3Last Post: 27-02-2015, 07:12 PM - 
  
problems with mach or windows
By johngoodrich in forum Computer SoftwareReplies: 2Last Post: 02-03-2012, 07:23 PM - 
  
Windows 7 Service Pack 1 Now Available
By Lee Roberts in forum Computer SoftwareReplies: 6Last Post: 01-04-2011, 10:52 PM 
                


						
					
					
						
		
		

				
				
				
					
  Reply With Quote
					
						

Bookmarks