Thread: Higher end Chinese controllers?
-
07-10-2016 #21
-
07-10-2016 #22
That's what I'm trying to find out.
.
If the control panel doesn't come with FRO/SSO dials, you can't add them as the controllers have no analogue inputs, and that is one feature I use quite a bit. Turning a dial is far better than continually pressing buttons.
.
The 990/1000 series controllers also have less IO available. 218MC has 47 of each, whereas going by my quick count of a 990/1000 series manual, they only have 21 In and 12 Out defined as user configurable. I suspect some of the dedicated In/Out can be used by editing the ladder, but I'm not wanting to spend that much time reading the manuals just yet.
Creating an In/Out spreadsheet will be one of my next jobs, as I think the current retrofit will need less than 12 outputs.Avoiding the rubbish customer service from AluminiumWarehouse since July '13.
-
07-10-2016 #23
-
07-10-2016 #24
Last edited by JoeHarris; 07-10-2016 at 11:31 PM.
-
08-10-2016 #25
-
08-10-2016 #26
-
08-10-2016 #27
Gary,
does it say cock on the picture of the tap too?https://emvioeng.com
Machine tools and 3D printing supplies. Expanding constantly.
-
08-10-2016 #28Visit Us: www.automationshop.co.uk
-
09-10-2016 #29
-
09-10-2016 #30
The turning gsk980ta3 controller can use a handwheel pendant, number GSKsc10, http://www.cncmakers.com/cnc/control...G_Pendant.html
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Comparing motion controllers...
By JW1977 in forum Control Hardware & SystemsReplies: 34Last Post: 17-02-2016, 02:36 PM -
Wiring Steppers to controllers
By liamo1991 in forum Motor Drivers & ControllersReplies: 1Last Post: 05-09-2013, 01:58 AM -
PCI Motion Controllers
By IanS1 in forum Motor Drivers & ControllersReplies: 0Last Post: 16-05-2013, 12:13 AM -
Difference between controllers and Cad/Cam programming???
By 0625272 in forum Computer SoftwareReplies: 0Last Post: 23-06-2011, 08:40 PM -
Programmable logic controllers
By cncezee in forum Motor Drivers & ControllersReplies: 12Last Post: 15-11-2010, 08:44 PM
Bookmarks