Threaded View
-
01-12-2017 #11
Mr Postman arrived with a package from China for me can be only one thing ;)
Won't be back at work till 1pm but shouldn't take long to fit it, test it. Then drill the box and fit grommets for the nema's, limit switches, mains input & spindle output's, fit the box, fit the plate in the box and finally fir the wiring to the board lol. Hoping to get it all done today then tomorrow, get a sheet of mdf for the bed and start configuring the machine. Be nice to get the bed milled flat and vacuum holes drilled over the weekend.
I have a a few things I would like to build out before the end of the year and I'm starting to believe I might just get at least some of them built ;) Not long now.
e2a was my AM882 in the post dropped it on the machine and tested it works fine ;) I know have 4 moving axis and my Y axis is linked up. Took me some head scratching in Linuxcnc and editing the .hal and .ini files probably click a button in Mach 3 lol.
Tomorrow I can get the box finished and start with homing.Last edited by Desertboy; 01-12-2017 at 08:21 PM.
http://www.mycncuk.com/threads/10880...60cm-work-area My first CNC build WIP 120cm*80cm
If you didn't buy it from China the company you bought it from did ;)
Thread Information
Users Browsing this Thread
There are currently 7 users browsing this thread. (0 members and 7 guests)
Similar Threads
-
New Table Build, 12x6 work area, drawings up any advice?
By silverdrgn in forum Plasma Table MachinesReplies: 3Last Post: 23-01-2016, 07:34 PM -
BUILD LOG: My 1st Hybrid Steel/Ally (1150 x 850 work area) (comments/advice please)
By lebies in forum DIY Router Build LogsReplies: 18Last Post: 19-08-2014, 12:00 PM -
BUILD LOG: Melbourne Andy CNC build 1220x810 work area
By AndyGuid in forum DIY Router Build LogsReplies: 4Last Post: 20-04-2014, 08:25 PM -
RFQ: acetal parts turned lathe work
By dazza in forum Projects, Jobs & RequestsReplies: 10Last Post: 13-06-2013, 10:15 AM -
Wanted - Regular work for reliable machine shop in Northants/Kettering area
By Narkedat90 in forum Opportunities Available & SoughtReplies: 4Last Post: 06-04-2013, 04:09 PM
Bookmarks