Thread: Newbie looking for advice.
-
04-12-2017 #1
Hello,everyone.Just joined looking for advice.
Finally decided to buy a CNC router.But which one?
Any recommendations re: reliability,ease of use,back up,etc.?
Looking to use Aspire,larger platen preferred.
Thanks in advance.
Regards
Keith
-
-
05-12-2017 #3
Materials to be cut would be MDF primarily,oak,cherry,chestnut,pine.
Occasionally cast acrylics,polyurethane.
Single phase,
Budget £4-5000.
Thanks
Keith
-
05-12-2017 #4
What size working area ?
-
05-12-2017 #5
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
NEW MEMBER: Hello, Newbie seeking advice.
By Lodds in forum New Member IntroductionsReplies: 3Last Post: 22-07-2017, 04:04 PM -
NEW MEMBER: Another Newbie looking for advice..
By GBR1 in forum New Member IntroductionsReplies: 16Last Post: 09-07-2017, 09:17 PM -
NEW MEMBER: Newbie needs CNC advice
By Jacks in forum New Member IntroductionsReplies: 40Last Post: 07-02-2017, 10:52 PM -
BUILD LOG: Hi newbie looking for advice
By bluebug in forum DIY Router Build LogsReplies: 13Last Post: 30-08-2016, 11:41 PM -
Newbie hoping for acrylic advice
By Red_Stafford in forum New Member IntroductionsReplies: 12Last Post: 25-06-2016, 07:11 PM
Bookmarks