Thread: Leaser CNC on Glass
Hybrid View
-
10-02-2018 #1
Hi there
I have a general question is it possible for a Leaser CNC to Cut the Glass like the ones that I have attached in my attachment?
if it was Wood I know I could use Profile Cut with right tip. But with Leaser I just do not know.
Also What are the proper applications in order to Work on Glass? I know for wood ArtCam is one of the best.
Regards
Jhonansaro
-
11-02-2018 #2
Not without spending a LOT of money, on a very high powered laser.
The glass in the pictures are ground and polished, which would still be required to get edged like that.Gerry
______________________________________________
UCCNC 2022 Screenset
Mach3 2010 Screenset
JointCAM - CAM for Woodworking Joints
-
11-02-2018 #3
Hi garry
thanks for the reply, by the way are you the same Garry from CNCZone?
On issue of Leaser, How about some thing in the range of about 120 W? Would it be enough?
also on the process itself, I do not think that profile cutting would do the Job, and It must be some sort of 3D relife
Operation, Could you explain on it, what software do you recommend for it?
regards
jhonansaro
-
11-02-2018 #4
-
11-02-2018 #5
Yep, this kind of thing
https://www.youtube.com/watch?v=z2ysBHglZGw
(We have 2 of these at the place I work)
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
CNC Router to cut glass, marble, advice on which machine is best to buy please
By barrykavanagh365 in forum Gantry/Router Machines & BuildingReplies: 2Last Post: 05-03-2019, 08:37 AM -
Magnifying Glass Housing
By Wal in forum Woodworking Project ShowcaseReplies: 10Last Post: 14-09-2016, 04:13 PM -
FOR SALE: 3D crystal glass engraving machine and 3D camera for sale
By tomlisek in forum Items For SaleReplies: 0Last Post: 21-10-2014, 11:55 AM -
Steam Engine made of GLASS
By WandrinAndy in forum General DiscussionReplies: 2Last Post: 13-06-2013, 09:57 AM -
Cutting/Milling Glass?
By Tenson in forum Machine DiscussionReplies: 1Last Post: 12-04-2012, 10:10 PM
Bookmarks