Thread: Sieg/ARC X3 CNC mill conversion
Threaded View
-
20-10-2018 #1
I have an older Sieg/Arc X3 CNC mill conversion. In fact one of the first I believe. It has developed some backlash in the X axis. It appears to be in the ballnut area or the ballnut housing. There is no backlash in the connector between screw and stepper. - I seem to remember that something here is prone to coming loose. But have checked everything I can see, short of dismantling.
If any of you guys can shed any light on the problem. I would be extremely grateful for your advice,
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
BUILD LOG: Sieg SX2.7 CNC conversion
By Edward in forum DIY Mill Build LogsReplies: 23Last Post: 11-06-2019, 03:01 PM -
Sieg X3 Conversion
By Vikash in forum Milling Machines, Builds & ConversionsReplies: 8Last Post: 04-01-2016, 05:18 PM -
CONVERSION: Need some help with a new SIEG SX2 Plus CNC Conversion
By Onocyclone in forum Conversion Build LogsReplies: 22Last Post: 17-09-2014, 01:00 PM -
CONVERSION: Sieg X2 CNC Conversion
By A11an in forum Conversion Build LogsReplies: 17Last Post: 16-01-2013, 06:06 PM -
Sieg sx2 conversion kit
By Goldigger in forum Milling Machines, Builds & ConversionsReplies: 3Last Post: 24-04-2011, 07:42 PM
Bookmarks