Thread: CNC Router Gerber Dimension 200
-
31-03-2019 #1
Gerber Dimension 200 Router. Boxed Omega 2 software and USB key complete with manuals included. This will need a computer running Windows XP with a serial connection . Selection of router bits and collets. Perske spindle for fine work and Porter Cable router for heavier work. Vacuum pump for hold down table and compressor for mist coolant for cutting non ferrous metal. Machine light .The machine is on a purpose made wheeled table to make it mobile but it is heavy.
Work area 900 mm x 800 mm stroke 57 mm.
Note 1 The computer, screen and keyboard shown are NOT included in the sale as this runs my Gerber Edge print / cut system.
Note 2 The machine runs on 240 volt single phase EXCEPT the vacuum pump which needs three phase 440v. This could be achieved with the addition of a small phase changer.
SOLD
There is a software package included in this sale. It is Gerber Omega 2 which is supplied by the manufacturers of the CNC router specifically for this machine. As stated in the listing, it will need a computer that is running on Windows XP . This computer MUST have a 9 pin and 25 pin serial connection socket for the router ( see photo) as well as a USB socket for the security key which allows you to operate the program.
The software pakage includes all the training manuals necessary to learn how to run the router.
Please remember the computer shown is NOT included the the sale
Last edited by neil3; 16-04-2019 at 11:25 PM.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
SOLD: Gerber Dimension 200 CNC Router
By vendka in forum Items For SaleReplies: 0Last Post: 03-10-2018, 02:53 PM -
Gerber Dimension 200 e Engravers RnR from the new Newb .
By Kru82 in forum Machine DiscussionReplies: 8Last Post: 02-09-2015, 03:05 PM -
FOR SALE: Gerber system 48 cnc router for sale
By Ahmed in forum Items For SaleReplies: 0Last Post: 22-04-2015, 12:11 AM -
WANTED: Gerber cnc router
By payne223 in forum Items WantedReplies: 0Last Post: 15-01-2015, 09:21 PM -
Gerber system 48 Plus router
By poppa jock in forum Machine DiscussionReplies: 0Last Post: 29-07-2013, 05:43 PM
Bookmarks