-
04-06-2019 #1
Hi all,
After finishing my build, I have one metre of 20mm profile linear rail and two ballscrews around 400mm long. Will confirm ballscrews length when I get home but they're both 1605 and have the fixed bearing end machined. Other end is cut off. All of these were bought from Fred at BST Automation last year.
Looking for a good home to a mycncuker. Would prefer if someone took it to use it rather than flog it.
Just the ballscrews alone would be enough to do the X and Z axis on a small machine or mill.
Cheers
NealLast edited by Nealieboyee; 04-06-2019 at 01:16 PM.
-
The Following User Says Thank You to Nealieboyee For This Useful Post:
-
04-06-2019 #2
All taken thanks!
-
The Following User Says Thank You to Nealieboyee For This Useful Post:
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
BFT 20mm rail
By driftspin in forum Gantry/Router Machines & BuildingReplies: 1Last Post: 10-08-2017, 07:02 AM -
WANTED: 20mm rail
By johnsattuk in forum Items WantedReplies: 2Last Post: 03-11-2015, 08:41 PM -
buying ball screws
By bmbaz in forum Marketplace DiscussionReplies: 2Last Post: 10-05-2014, 03:57 PM -
WANTED: 2 x 20mm Fully Supported Round Rail
By longy in forum Items WantedReplies: 0Last Post: 30-03-2014, 09:21 PM -
Best way to machine ball screws?
By Ross77 in forum Lead Screws, Nuts & SupportsReplies: 34Last Post: 17-06-2012, 05:10 PM
Bookmarks