Morning,

I am really hoping someone somewhere might be able to help with this.

We have just bought a Kiaturn KT15 cnc lathe which was operating fine before it was moved to us. On arrival and powering up it presented a 310 alarm servo off and also a z over travel.

Now it powers up fine and we can get the hydraulic pump running and up to pressure but when we do that is moves to a 280 machine not ready alarm.

The servo drives have power going to them and there is no fault indicated on the lcd display on the boards. We have tried to check all the e stop circuits to see if one is stuck or open but it seems that's all fine.

We are a bit lost as to what i can now be, I have seen on other forums people having the same issue after the machine has been moved so I am guessing its something thats been knocked or moved in transit.

To add to this when the machine was lifted the z axis travelled far forward towards the chuck under its own steam and also back to the overtravel switch which as I mentioned we cleared by manually moving the ball screw.

Any help would be greatly appreciated - we have the LX3 manual but nothing for the KT15 itself.

Thanks in advance

Francis