Thread: ELU 860 CNC Machining Centre
-
21-03-2020 #1
Hi there ,
I have recently bought an Elu 860, the machine did not come with a manual or pc however I will drive from the keyboard.
does anyone know how to set up the PC Link on the machine or better still know where I can get the manual.
Thanks ,
-
22-03-2020 #2
Hi
Not a lot of help I'm afraid, I have been running an 860 at a "men's shed" for the last 3 years and I think there may be a manual there. Unfortunately the shed is closed until further notice. I modified it to 1605 ball screws as feed rates with the 2mm pitch original screws were far too slow, also built a new control panel using "Estlcam" software.
I also have at home a 600 which I have modified to 1605 screws and servos, so do have quite a lot of spares if needed.
-
22-03-2020 #3
Hi Johnsattuk
Thanks for the reply, when the shed reopens I would appreciate it if you would have a look for the manual, I have considered just buying a new control card and running in on something like mach3 but if I can it will get it running as is first , do you know what the max speed on the table was , I will let you know if I discover I need parts ,
Thanks again ,
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Centre Drills
By jamesthomsan in forum Tool & Tooling TechnologyReplies: 1Last Post: 03-02-2020, 12:23 PM -
scm tech 95l cnc machining centre User manual or parts lists
By george uk in forum SCM Group RoutersReplies: 13Last Post: 28-04-2015, 08:18 AM -
FOR SALE: Boxford Vertical Machining Centre 190VMC Excellent Condition
By Bartell in forum Items For SaleReplies: 3Last Post: 12-11-2014, 09:54 AM -
Dust and Chip extraction for large matrix table machining centre.
By gavztheouch in forum Dust Extraction & CollectionReplies: 2Last Post: 29-05-2013, 10:03 PM -
Centre tap transformer?
By veedub1955 in forum General ElectronicsReplies: 5Last Post: 15-05-2012, 11:10 PM
Bookmarks