Thread: CNC upgrade, need advice
Threaded View
-
24-08-2022 #1
Hi all,
My name is Tim, I have been in the CNC world for about 1year. I have built a full-size sheet fit machine with temporarily fitting (brackets and supports) and successfully used it.
At the moment i have dismantled everything and restarted the project.
I need to create more space between the gantry and the bed as it's difficult to fit vacuum extraction or a bigger spindle, here is option for this in my drawing, does it work this way, or linear bearing has to be flat on top?
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
CNC upgrade, need advice
By jaka37 in forum Machine DiscussionReplies: 3Last Post: 16-10-2022, 07:08 PM -
Advice on Controller Board upgrade for CNC 6040
By Pete1977 in forum Motor Drivers & ControllersReplies: 0Last Post: 21-01-2021, 03:51 AM -
Advice for rigidity upgrade. To profile or not?
By Nealieboyee in forum Gantry/Router Machines & BuildingReplies: 11Last Post: 11-10-2019, 07:24 AM -
MicroRouter Spindle upgrade - advice and help required
By ngwagwa in forum Spindles & Drive MotorsReplies: 16Last Post: 26-05-2019, 02:52 PM -
advice on upgrade to 5 axis control
By alanb in forum General ElectronicsReplies: 17Last Post: 27-07-2012, 06:29 AM
Bookmarks