Hi,
I have this spindle from VEVOR and is air cooled and this VFD .
https://eur.vevor.com/spindle-motor-...p_010384570403
After reading the manual I think I made all setups correct but my spindel get hot after 20min of running.
User guide is here:
https://www.et.byu.edu/~sorensen/A2%20VFD%20Manual.pdf
I use this spindle by starting manually with panel buttons START/STOP
I don`t know if is right to be that hot ( I don`t have thermometer but cannot keep fingers on it for 5 seconds). I have another spindle from vevor (400w) but it is running warm.
It is used to carve styrofoam (polystyrene)
Sorry for my english but is not my native language...
Mybe somebody knows much better this kind of VFD`s and help me to stup right.
Thank you.