-
30-09-2010 #1
out of perspex? here's how to go about joining it up after initial layout and cuts.
Use a router and v groove bit,use the router on the slowest setting to stopthe bit welding to the perspex.
Quite neat way of doing it in my opinion....
-
30-09-2010 #2
thats a nifty way.. might have to give that ago me sen!
-
01-10-2010 #3
I thought so too,with careful planning out on a piece of paper first to see where the V cuts need be,we can make a one unit cover for things...say like an L shaped housing or a box that covers the side and back of something? the trick is to cut the V slots in the perspex at nearly full depth of the perspex leaving about 1/2mm for keeping it together before tape&snappage.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
RFQ: Custom M12 Bolts make in PEEK
By Tenson in forum Projects, Jobs & RequestsReplies: 30Last Post: 19-06-2013, 07:06 PM -
Make your own Super- PID ... not that hard to make ! .... says electronics genius!
By Buba b in forum General ElectronicsReplies: 4Last Post: 26-04-2013, 08:37 AM -
Mach3 custom USB Keyboard
By rnr107 in forum Electronic Project BuildingReplies: 28Last Post: 21-06-2012, 02:53 PM -
RFQ: Custom CNC work - Just wondering how much...
By Mustang80 in forum Projects, Jobs & RequestsReplies: 0Last Post: 02-10-2011, 07:53 PM -
Custom power DC supply
By M250cnc in forum Electronic Project BuildingReplies: 11Last Post: 22-11-2010, 09:48 PM
Bookmarks