Good afternoon,

I have for sale a Tormach PCNC1100, (see www.tormach.com)

This machine was excellent when I started out, but the ability to access a much larger machine has presnted its self, so I have decided tosell my personal machine, namley as I have moved house and no longer have a garage... so it is being stored for me at the moment.

PCNC 1100 Mill
Deluxe Machine Stand
Lifting Bar
Machine Arm
Tool Tray for Machine Arm
TTS - JT1
1/4" Keyless Chuck for JT1
TTS - JT2
3/8" Keyless Chuck for JT2
TTS Boring Arbor
Boring Head
Boring Bar Set
Face Mill
Performance Tormach Machine Controller (Dell PC - Setup by Tormach)
Standard LCD Monitor
Jog/Shuttle Controller
Mini Keyboard
USB Bulkhead Port Assembly
USB Extension
Video Extension Cable, SVGA
4th Axis 8" Table
4th Axis Tailstock 8"
3 Jaw Chuck 8"
4 Jaw Chuck 8"
5C Collet Adaptor for 8" Rotary Table
5C Collet Set
Kress 800 Watt High Speed Spindle Kit
A good selection of Tormach Tooling (Er collet Holders, Er collets etc)

The machine is generally in good condition and has only been used for cutting aluminium, the machine is well built and for a lower cost and size machine is defiantly well built and weights a lot.

For collection I would recommend that you get a flatbed or a good sized trailer, I have moved it several times (with the help of friends) some lifting equipment does help, but it will fit through a standard door with some effort (see the Tormach site for details, they have a moving guide), however at the moment it is behind a garage door and so collection will be significantly easier).

I would ask people to note the following:

The 4th axis needs a new stepper drive (the only fault we have had) but as I used the 4th axis twice, I never got round to replacing it ($248 USD + Shipping) (10 minute job)

A new draw bar may be useful, as it is a little "loved", still works fine, just the spanner attachment is a little rounded in places. (15 USD +Shipping) (I guess around 1hour by the time it is done) However they have released the power draw bar for anyone who is interested!!.

As for price will the setup with the parts above is Circa $14000 USD new + Shipping and VAT (Say, £800 shipping and 20% VAT, would be around £12K give or take)

I am open to sensible offers, as I am busy at the moment I would sell with out the bits sorted and leave it to you, or for the right price, I can get the drive and draw bar sorted out, I am not sure exactly what I expect for it.... so i am interested to see any offers.

Finally the machine can be seen working (in bristol) and I will get some photos up asap.

Any questions please post away - or offers PM me and I will get back to you asap.

Regards

James Blythe