Hybrid View
-
12-10-2011 #1
You will require a 0-10v speed control, your BOB may or may not have this. Thou you can a buy a spindle control board cheap enough.
Then it's just a case of setting VFD params and Mach3 settings.
First let me warn you that the Huanyang drives are very low quality and I've personally had trouble with them and know of others the same.
I would strongly recommend you buy the VFD in UK, also buy a torque vector drive for best performance. The torque vector drive will allow you to run the spindle at lower rpm's and still have some torque left. . . . I can run mine between 4-5K and still be usable.
Thread Information
Users Browsing this Thread
There are currently 5 users browsing this thread. (0 members and 5 guests)
Similar Threads
-
help connecting a pot to huanyang vfd 2.2
By edgas10 in forum General ElectronicsReplies: 15Last Post: 14-08-2016, 06:45 PM -
Huanyang VFD control plugin for Mach3, USB RS-485
By JayPunchbuggy in forum Spindles & Drive MotorsReplies: 19Last Post: 15-05-2013, 08:00 PM -
huanyang vfd 2.2 error E.CO.A
By edgas10 in forum General ElectronicsReplies: 0Last Post: 01-07-2012, 08:12 PM -
PDA Controlling A Steeper Motor
By ceaser in forum Stepper & Servo MotorsReplies: 5Last Post: 23-05-2009, 03:03 PM
Bookmarks