Thread: Very Sick Lenze 534 Controller
-
18-09-2012 #21
Hey Buddy, You do what you think is best, If it saves me replacing the unit im up for it, and even if it turns out to be dead all we can do is try.
RickAlways bear in mind that your own resolution to succeed is more important than any other - Abe Lincoln
-
27-09-2012 #22
Small update.
Here is the Lenze 534 Controller before repair.
And again after repair.
Looks much better, but not yet tested."If first you don't succeed, redefine success"
-
27-09-2012 #23
i can see whats wrong with it....
-
28-09-2012 #24
-
28-09-2012 #25
damn you've spotted it, ......lol.....
seriously though, behind the middle pot and the add in card there looks like a fuse (small reddish brown cylinder), which has been changed for a capacitor. I may be wrong on the fuse but it looks like one.
-
28-09-2012 #26
Here is the list of parts that I have replaced.
T1 - 2x15VAC 1.8VA Transformer.
C2 - 470uf 35v.
C4 - 470uf 35v.
C5 - 4.7uf 63v.
C6 - 47uf 35v.
C7 - .47uf (470nF) 100v."If first you don't succeed, redefine success"
-
28-09-2012 #27
But does it work??? Have you tried powering it up and seeing if you get reasonable volts in the obvious places?
-
28-09-2012 #28
I have tested it as far as I can without having the DC motor to test it with.
Will know more once Ricardoco gets it back middle of next week, and connects it up."If first you don't succeed, redefine success"
-
28-09-2012 #29Always bear in mind that your own resolution to succeed is more important than any other - Abe Lincoln
-
30-09-2012 #30
i just had a mate look at the photo and he says although it looks like a fuse, it also looks like a cap. If it says C? on the board then it will be a capacitor.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Broken transformer in Lenze Speed Control 530.
By Samuel59 in forum Motor Drivers & ControllersReplies: 3Last Post: 23-04-2014, 12:22 PM -
TinyG CNC Controller in the UK?
By Nimbus in forum Marketplace DiscussionReplies: 0Last Post: 14-06-2013, 06:03 PM -
Lenze 534
By Ricardoco in forum Milling Machines, Builds & ConversionsReplies: 12Last Post: 29-07-2012, 09:59 PM -
FOR SALE: Controller Box for sale
By lateAtNight in forum Items For SaleReplies: 12Last Post: 04-03-2012, 10:17 AM -
Controller Box
By M250cnc in forum Motor Drivers & ControllersReplies: 1Last Post: 21-11-2010, 01:34 AM
Bookmarks