Thread: Drag Knife anyone?
Threaded View
-
03-11-2019 #15
Since I posted about the plotter and knife, the plotter turned out to be worth a few bob, so I flogged it and bought a P-Cut 630
vinyl cutter.
I saw loads of things about P-cuts and people not being able to get them working, So I bought one very cheap cos the bloke couldn't
get it to work!
A lot of the software available is really grotty. I ended up with a copy of flexisign pro. I cut all the masks to paint the transfers on a
few push bike frames, some of the lettering I cut was less than 2mm high, the cutter worked flawlessly. I didn't mess about, I did the
drawings in illustrator and cut them with flexisign. I read something and the bloke was drawing in inkscape and cutting directly
from inkscape.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Cable drag chain
By birchy in forum General ElectronicsReplies: 9Last Post: 04-01-2014, 12:45 AM -
Introducing LIMAC knife cutting machine with vision system
By therouterlady in forum Manufacturer NewsReplies: 1Last Post: 22-05-2013, 11:58 AM -
Drag Chains
By Mad Professor in forum General ElectronicsReplies: 3Last Post: 30-04-2013, 11:23 PM -
Drag chains
By jcb121 in forum General DiscussionReplies: 4Last Post: 14-05-2012, 11:44 AM -
wiring for drag chains
By johngoodrich in forum General ElectronicsReplies: 10Last Post: 09-02-2012, 08:44 PM
Bookmarks