-
10-10-2012 #1
Gents,
I'm trying to build an L shaped box which has a z axis assembly mounted on it. Looking for someone who can CNC the following in MDF, plywood or alu (it's a prototype to try out an idea, so I'm trying to keep the costs down):
The plates will need holes for screws / bolts and a few larger holes for bearings. MDF / plywood would need to be 15mm, alu would be 10mm thick.
The above drawing is a rough estimate of how many plates are needed and the dimensions, I can of course provide more precise drawings for the job.
Regards,
dsc.Last edited by dsc; 04-01-2013 at 04:26 PM.
-
22-10-2012 #2
Did you manage to get these cut?
-
22-10-2012 #3
Hi D-man,
nope, no offers yet. Would you be interested?
Regards,
dsc.
-
22-10-2012 #4
Yeah I could be interested. However I don't get back until wed. If you like I can drop you a line then. In the meantime drop me a more accurate file over.
-
22-10-2012 #5
All in mdf ok for you?
-
22-10-2012 #6
Yup, all MDF is the plan. PM sent.
Regards,
dsc.
-
25-10-2012 #7
Just a quick update of the overall view, going with 18mm MDF and cross dowels for assembly:
Regards,
dsc.
-
04-01-2013 #8
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
RFQ: Simple job cutting simple shapes out of camera lens cap
By RockandGrohl in forum Projects, Jobs & RequestsReplies: 15Last Post: 20-04-2013, 01:23 AM -
Break board 3-axis optical isolation, simple!
By thjremy in forum Electronic Project BuildingReplies: 0Last Post: 06-04-2013, 04:42 PM -
stability - monolith vs. two-part assembly
By dsc in forum Gantry/Router Machines & BuildingReplies: 7Last Post: 24-10-2012, 03:03 PM -
Z axis assembly - unsupported rail for very limited movement
By dsc in forum Gantry/Router Machines & BuildingReplies: 2Last Post: 10-10-2012, 12:44 PM
Bookmarks