Thread: Fixed Gantry Router
Threaded View
-
30-04-2009 #2
Last Activity: 23-10-2023
I definitely ordered a coupling with 6.35 on one end and 6 on the other. The only thing is when it arrived there were two in the box. I just assumed I'd gotten lucky or something, but now I am think one was 6 on both ends, and the other 6.35 on both ends. So I might have accidently put on the 6.35 on both ends. I'll investigate tomorrow.
As you can see, its a speed daemon :)
Edit: Also, your right, the z is a little high. There are two things though. First of all, I have a milling vice which will add quite a bit of height. Secondly the table still needs beefed up a bit, and lastly, if need be, the whole gantry can come down a little.Last edited by lateAtNight; 30-04-2009 at 09:47 PM.
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
BUILD LOG: Monster fixed gantry router for aluminium & wood
By jonboycnc in forum DIY Router Build LogsReplies: 9Last Post: 12-01-2014, 11:26 PM -
BUILD LOG: Vertical fixed gantry. Design & build. (Steel/epoxy)
By Greeny in forum DIY Router Build LogsReplies: 8Last Post: 19-08-2013, 08:26 PM -
RFQ: RQF: Router Gantry plates
By lateAtNight in forum Projects, Jobs & RequestsReplies: 1Last Post: 27-12-2012, 04:56 AM -
BUILD LOG: New build - fixed gantry mill using extruded profile
By toolchimp in forum DIY Router Build LogsReplies: 3Last Post: 09-11-2012, 04:10 PM -
Bellows for a gantry mill/router
By Smiler in forum Milling Machines, Builds & ConversionsReplies: 0Last Post: 19-11-2008, 09:25 PM
Bookmarks