Threaded View
-
15-02-2015 #1
Hi All,
Fingers crossed I have put this thread in the right place - apologies if not..
I recently stumbled across this forum, not sure how I missed it up until now but that's another story lol
Anyway to cut to the chase I started building my first CNC towards the end of last year, as is normally the way things set me back and other projects took all my time up. On the proside I how have it 95% wired up and motion control is working a treat. All I'm left with is the VFD.
Now I'm sure this is a pretty basic/stupid question but here goes:
Am I correct in thinking the VFD (2.2kw) can be powered directly from the plug socket (via an isolator)? Or does it have to be wired via a separate power source?
I just don't want to plug it in and blow it up within seconds,
Many thanks in advance.
Bez
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
BUILD LOG: a Steel Box Section Build with SBR20 & Ballscrews Plus a few questions
By grain_r in forum DIY Router Build LogsReplies: 130Last Post: 27-01-2023, 06:47 PM -
Plasma table build, first question....
By Davek0974 in forum Plasma Table MachinesReplies: 51Last Post: 01-08-2014, 03:11 PM -
Wiring Help
By Toddy in forum Motor Drivers & ControllersReplies: 8Last Post: 23-11-2010, 01:48 PM -
Limit switch wiring question ...
By Wobblybootie in forum General ElectronicsReplies: 20Last Post: 31-10-2010, 11:06 AM -
wiring help
By ste68blue in forum Stepper & Servo MotorsReplies: 6Last Post: 29-07-2009, 10:23 AM
Bookmarks