Thread: Help re electrical input
-
01-06-2015 #1
Hello, I'm hoping that someone may be able to help. We have recently purchased a 1990 Jobs Jo'mach 21 CNC machine. The machine did not come with any electrical specifications so we are slightly at a loss with completing some of the information for our electricity supplier in order for them to be able to up our supply voltage. We need to provide them with the rating or aggregate rating, starting power factor and maximum starting current. We have contacted Jobs who manufactured the machine but due to its age they don't have the information that we require, we have also contacted the two previous owners and various electrical contractors who have worked on the machine. If anyone is familiar with this machine or similar then any advice would be very welcome! Many thanks, Charlotte
-
08-06-2015 #2
maybe that could help , there are some specs there
http://www.wotol.com/1-jobs-jomach-2...prod_id/988202
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Riveting pcb holes - engineering type input sought!
By HankMcSpank in forum General ElectronicsReplies: 21Last Post: 21-04-2015, 05:44 PM -
Haunyang VFD input voltage
By JamesUS in forum Spindles & Drive MotorsReplies: 0Last Post: 18-01-2015, 08:25 PM -
Aluminum router build - Could use some input
By Tumblebeer in forum Gantry/Router Machines & BuildingReplies: 17Last Post: 01-09-2014, 09:48 PM -
Stepper controller to manually input a specific degree
By Web Goblin in forum Motor Drivers & ControllersReplies: 11Last Post: 13-10-2013, 05:47 AM
Bookmarks