Threaded View
-
20-12-2015 #4
Thats independent from the steppers, the control unit must have the possibility to start the motors with an external signal in this case a light barrier, but it can be anything else. If you don't have an index hole in your encoder disc, than you can bore a hole in an extra disc or make a cam somewhere on the spindle. If your bob runs bidirektional, so you can connect homesensors, endsensors then you must only activate the option in your Mach3 control program and connect the sensor. But, I don't know that program
Last edited by uli12us; 20-12-2015 at 12:23 PM.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Boxford 190vmc Mach3 Conversion - Help needed!
By Joshi in forum Boxford Vertical MillsReplies: 2Last Post: 30-09-2015, 11:55 AM -
retrofit Boxford vmc mill 260 Info needed on Yaskawa contactor relay and VFD choices
By Roboteernat in forum Boxford Vertical MillsReplies: 10Last Post: 13-03-2015, 12:25 PM -
Boxford 160 cnc convert to mach3, Info needed.
By SparkyMarc in forum Boxford LathesReplies: 5Last Post: 01-11-2014, 11:38 PM -
Anyone in Surrey willing to convert --- Boxford mill to mach 3
By Gasgasbones in forum Marketplace DiscussionReplies: 12Last Post: 19-10-2014, 10:25 PM -
GRP/Fibreglass info needed
By irving2008 in forum General DiscussionReplies: 23Last Post: 06-08-2014, 07:53 PM
Bookmarks