Thread: Austin Allen Gnat 250 PRT
Threaded View
-
08-05-2016 #1
Austin Allen 250 PRT Injection Moulder
If I remember rightly it has a shot capacity of 12gm.
It needs 1kw single phase (240vac) for the heater and electrics. @80psi, air consumption is 7.8cfm for a 10 second cycle, but on single shots you can get by with a 4cfm compressor (just). On auto the cycle time can be adjusted from 3-50 seconds.
The lock pressure is 7.5 tons @ 100psi and 9 tons @ 120psi
Maximum mould (billet size) 7.5" x 8" x 4" (x2 as they are mould halves) the mould can then open upto 4" for part ejection.
Machine foot print 32" x 15" and it's 66" tall, can be broken down into two or more parts for transport. I got it home in an estate vehicle, the machine is over 200kgs in total weight.
I don't have any pellets left as they are long gone, last used with nylon some years back. I am looking for £600 ono, buyer collect I'm afraid from South Yorkshire, it has the original operating and service manual.
Any further questions please just ask.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Austin Allen Gnat 250
By clubhead in forum Moulding MachinesReplies: 0Last Post: 25-08-2015, 04:03 PM -
eBay: Another Austin Allen GNAT injection moulding machine
By steve400 in forum Items On eBay UKReplies: 1Last Post: 24-06-2015, 11:36 AM -
eBay: Austin Allen GNAT Injection Moulding Machine - runs on 240V
By steve400 in forum Items On eBay UKReplies: 2Last Post: 19-04-2015, 05:36 PM
Bookmarks