Threaded View
-
15-06-2020 #1
Evening all,
I'm currently planning a 4x8 router build. I'm not sure which drive type to go with yet.
My other post http://www.mycncuk.com/threads/13764...r-a-CNC-router
My thinking was to use ballscrews on each axis as in my mind they seem to be the easiest option (apart from the Y axis).
I have no experience with belts, do they stretch out and need adjusting? If so, how often?
P.S. Does anyone else find no matter what you search for, you get the same results in the forum search?Last edited by scott88; 15-06-2020 at 09:49 PM. Reason: To add link to my other post
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Large Format Epoxy Granite Gantry CNC - Looking For Feedback
By Max Maker in forum Gantry/Router Machines & BuildingReplies: 5Last Post: 23-08-2019, 04:57 PM -
Large Format Steel Framed Router
By nathandavies in forum Gantry/Router Machines & BuildingReplies: 2Last Post: 07-02-2016, 02:51 PM -
BUILD LOG: First CNC Project - 3 Axis - Large table format
By Xavi in forum DIY Router Build LogsReplies: 2Last Post: 01-12-2015, 10:44 PM -
format 4 Profit H08
By alexfindlater in forum Machine DiscussionReplies: 3Last Post: 10-07-2015, 03:52 PM -
eBay: large amount of machines on e bay lathes mill plus other stuff
By Dellboy in forum Items On eBay UKReplies: 0Last Post: 17-06-2012, 09:35 AM
Bookmarks