-
24-01-2021 #1
Adtech (Chinese) industrial CNC system c/w 2.2Kw servo motor and driver for spindle,2 off 1.8Kw servo motors and drivers for X and Y axis and a 750W servo motor and driver for the Z axis (all servos and drivers are AC).Also comes with main console and sub console with an MPG.input and output boards, and all cables and fittings.Would make an excellent retrofit for a BP interact.Originally purchased for a BP EZI TRAK,but changed to another system as I wanted A,B and C axes.
Never ran,but shop soiled as it has been on the shelf for a couple of years.All manuals and instructions included.Looking for £1000.
-
25-01-2021 #2Current Activity: Viewing Is a 600W AC servo better than a matching asyncrounous single phase AC motor?
What model number is the controller? Willing to split any of the system?
-
25-01-2021 #3
-
26-01-2021 #4Current Activity: Viewing Is a 600W AC servo better than a matching asyncrounous single phase AC motor?
Understood, not a bad price. Problem is, I dont need all of it. I'm primarily after the spindle motor / setup to see if I can upgrade my Bridgeport with, the other stuff Ill make use of as needed - the control might be interesting but just invested in SGHZ stuff for my lathe (similar setup) but would remain with them most likely for my next upgrade / retrofit.
Let me think about it.
Thanks
-
26-01-2021 #5
Will put on Ebay.The 2.2kw spindle motor is mounted on a motor plate that fits a Bridgeport BR2J head with a motor driven 10M pulley of 72 teeth driving a spindle pulley of 36 10m teeth,which gives a 2:1 ratio.Motor running at 60hz will give 3600rpm at spindle (approx.).
Last edited by molliemilo1; 26-01-2021 at 08:06 PM. Reason: More info.
-
29-01-2021 #6Current Activity: Viewing Is a 600W AC servo better than a matching asyncrounous single phase AC motor?
Just looking at this again. Can you send me some info about the spindle system please?
Is it similar (or the same) as this?
https://www.szghauto.com/product/93.html
-
31-01-2021 #7
CNC system now sold.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
FOR SALE: Complete CNC plasma control system with THC from CandCNC.com
By adscnc in forum Items For SaleReplies: 2Last Post: 11-01-2022, 01:25 AM -
FOR SALE: Conect 121 (updated) system for sale - complete or in part
By Clockworld in forum Items For SaleReplies: 0Last Post: 20-05-2019, 10:44 AM -
FOR SALE: CNC4U 3 axis system
By emlclcy in forum Items For SaleReplies: 10Last Post: 02-01-2018, 12:52 PM -
TTS / R8 system spindle
By routercnc in forum DrawingsReplies: 0Last Post: 23-07-2017, 08:12 PM -
FOR SALE: Selling z axis complete set up
By DrNik in forum Items For SaleReplies: 10Last Post: 20-08-2013, 12:38 PM
Bookmarks