Hello! I'm a 15 year old student from North Wales and I'm looking to have a prototype made of an aluminium case I designed. I have got quotes for production from various companies in the UK. The price is very affordable when 5 or more units are made but I simply cannot afford the £1000+ I have been quoted for prototypes. I am hoping someone would be able to help me out with getting one made or someone could suggest a place where I could get it made. Please know that I'm not looking for some free service. I just can't afford £1000.

The case is aimed at enthusiasts like myself and so it must be high quality otherwise I will not be able to get anyone interested in actually purchasing it.

The case is made from four pieces. I'll post pictures in this thread and on PM request I can give Solidworks files that can be viewed with measurements with the free software Solidworks Viewer.

Base piece : To be machined from aluminium, will be anodised after. I have no preference of what grade just something reasonably priced. Pictures can be seen here : http://i.imgur.com/rXFvLHf.jpg and http://i.imgur.com/BavKWHN.png

Plate : To be machined from brass. This is to add weight and is a feature that enthusiasts love. It may seem like a pointless extra cost but understand that I wouldn't have added it if it were pointless. Picture can be seen here : http://i.imgur.com/HNMYrKk.jpg

Top : To be machined from aluminium, will be anodised after. Pictures can be seen here : http://i.imgur.com/3s8uyRK.jpg and http://i.imgur.com/pHj78iR.jpg

Mechanical switch plate : To be laser cut from 1.5mm thick aluminium. The cuts must be very clean otherwise it will not function properly. Because of this it needs to be cut by a high end machine. I know of someone who had a similar plate cut by a 2500w machine and it turned out awfully and couldn't function. Picture can be seen here : http://i.imgur.com/BJHbOFa.jpg

Thank you for your time and thank you for looking!