PDA

View Full Version : BUILD LOG: Building a cnc router



fgfreek32
30-12-2018, 07:07 PM
Hello

Some time ago i asked the opinion for a router to build in alloy or steel.

Going to use steel.

y and z as are ready but niw working on the frame.

did cut all the steel today and it is heavy,total weigth off the steel 145 kg.

25267252682526925270

z and y axle are chinese linearwagens and i like them,

Did buy a set off four closedloop steppers nema e23 2.8 nm and also china and i like them very much.

The service off the seller is perfect.

Fir the x axle i did get hiwin 20 mm

Spindles i whil use also china brand,did order a axle 400 mm to see what they are like and they do what they want.


All members the best for 2019
(sorry for dutchy english)
greatings Frank

feldah
31-12-2018, 04:36 PM
Hey nice build. Can I ask what is your size of your y axis. Mine is 100x100x1400 mm and I am not sure if I can make the linearrails as you did on one side or if I should put one on top and one on the side so I get a larger distance between both. My z axis travel is 250mm

Sent from my MI 6X using Tapatalk

fgfreek32
31-12-2018, 04:40 PM
hello

Size is 1200 x1000 mm and z. hight will be adjustable max i am thinking about.

or make a dieper point for higher z valeu,all can still be changed

RobC
14-04-2019, 08:30 PM
Have you got any more updates on such build?