Threaded View
-
19-12-2017 #13
Last Activity: 18-12-2023
It sounds like you need to invest in some tools such as a straight edge, engineers square.
I attached one of the long X rails using a straight edge to get it straight, then it was easy to space the second rail from it. Once you have the bearings fitted and a gantry cross beam attached you can feel if the bearings are tight at any point in the travel and make adjustments to the second rail.
Here's how I squared the rest up; http://www.mycncuk.com/threads/6565-...5217#post55217Last edited by EddyCurrent; 19-12-2017 at 11:37 PM.
Spelling mistakes are not intentional, I only seem to see them some time after I've posted
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
BUILD LOG: 8x4 router build. Steel base & Aluminium gantry gantry
By D-man in forum DIY Router Build LogsReplies: 57Last Post: 13-12-2019, 10:43 AM -
BUILD LOG: All steel, no welding, 2000x1300x250mm
By eurikain in forum DIY Router Build LogsReplies: 55Last Post: 28-06-2017, 12:51 PM -
BUILD LOG: Small workshop CNC router, steel base, planning on ATC
By spresv in forum DIY Router Build LogsReplies: 24Last Post: 07-02-2017, 04:28 PM -
Steel base
By D-man in forum Items For SaleReplies: 4Last Post: 09-05-2016, 01:22 PM -
Redesign...Steel is now Extrusion
By FlyHighRC in forum Gantry/Router Machines & BuildingReplies: 7Last Post: 30-10-2015, 10:09 PM
Bookmarks