Let the fun begin !!! ???

[JAZZCNC]

what do you mean by auto configured.? Do you mean using the auto tune on the drives.? If so this won't stop them turning, If wrong or didn't work then all it would do is make motors run rough or stall.

What do you mean by Hook the signals in out.? . . . Need you to be more detailed on what your doing.

Have you wired the Drive enables into your e-stop system or in anyway at all.? . . If so then remove wires for elimination purposes.

It could be the Charge pump output if BOB as Charge pump feature.? You'll find it in OUTPUTS.
Also make sure you have Enabled the Motor output.

Take some screen shots of motor outputs, inputs and output screens so can see how your set.

Better still post up the Mach Xml file of your setup and I'll have a look. you'll find it in mach3 folder using the same name as the profile your using and ending with xml. (Zip it up)