kingcreaky
16-05-2018, 10:10 PM
Hi all
hope you are all well
simple sanity question, in mach3.. under MDI
I type G0 Y10
AND THE Y AXIS MOVES TO POSITION 10, 10MM (MACHINE MOVES CORRECTLY AND MACH DRO READS 10)
I TYPE G0 Y0
AND Y MOVES BACK TO POSITION 0 SAME AS ABOVE APPLIES
I DO THE SAME WITH Z (STARTING FROM 0 DRO ALSO 0)
G0 Z10 - AND Z MOVES TO 22.92 AND THE DRO REFLECTS THAT
THEN G0 Z0 AND IT MOVES TO 12.92
I HAVE MACH3 UNITS PROFILE SET TO MM
IF IT MAKES ANY DIFFERENCE I AM IN THE PLASMA PROFILE
ANY HELP GRATELY APPRECIATED
(IF I JOG THE Z (OBVIOUSLY NOT VERY ACCURATELY) BUT 1.0MM ON DRO IS 1MM PHYSICAL ON Z
hope you are all well
simple sanity question, in mach3.. under MDI
I type G0 Y10
AND THE Y AXIS MOVES TO POSITION 10, 10MM (MACHINE MOVES CORRECTLY AND MACH DRO READS 10)
I TYPE G0 Y0
AND Y MOVES BACK TO POSITION 0 SAME AS ABOVE APPLIES
I DO THE SAME WITH Z (STARTING FROM 0 DRO ALSO 0)
G0 Z10 - AND Z MOVES TO 22.92 AND THE DRO REFLECTS THAT
THEN G0 Z0 AND IT MOVES TO 12.92
I HAVE MACH3 UNITS PROFILE SET TO MM
IF IT MAKES ANY DIFFERENCE I AM IN THE PLASMA PROFILE
ANY HELP GRATELY APPRECIATED
(IF I JOG THE Z (OBVIOUSLY NOT VERY ACCURATELY) BUT 1.0MM ON DRO IS 1MM PHYSICAL ON Z