View Full Version : NEW MEMBER: Hi All, Good evening from North Wales.
robdl1981
18-05-2019, 10:15 PM
Hi all
Just wanted to introduce myself. My name is Rob I'm from North Wales and I have decided to jump feet first into the world of CNC. I have purchased one of the 3018 Pro Chinese machines and so far it seems very capable. I am wanting to get into aluminium pet tag engraving which mainly uses anodised aluminium. So far I've had mixed success but need a bit of help going forward I think. Anyway, it'll be nice to get to know you all and hopefully in the process help each other out.
Rob
visedge
19-05-2019, 09:16 PM
Hi Rob, welcome to the forum!
I saw a good video recently where a guy was using a spring loaded bit to drag engrave aluminium Dog tags. What type of engraving do you intend using?
robdl1981
20-05-2019, 12:08 AM
Well so far I just have v tip engraving bits. I am trying to find the correct feeds and speeds that doesn't break the tip.
Doddy
20-05-2019, 07:44 AM
I saw a good video recently where a guy was using a spring loaded bit to drag engrave aluminium Dog tags.
+1 for this - I did make a similar device and it was as good if not better than my attempts with a V-bit. Part of my problem was, I think, a random bunch of anodised aluminium sheet (offcuts from eBay) which was gummier than a fruit pastille - cut poorly and suffered a lot of tearing when engraved. The spring-loaded drag bit resolves a number of issues including the gumminess and flatness.
From my experience - probably worth sourcing/buying a proper drag engraver.
Don't kid yourself with your machine - try to get a good understanding about any backlash that you have, and the rigidity of the frame - no point looking for precision engraving if the machine is distorting under lateral loading. Also examine and understand the stiffness of your spindle mount.
Clive S
20-05-2019, 09:17 AM
Yes, three series is very gummy try 6 series or even 7 series
Kitwn
20-05-2019, 01:09 PM
I bought one of these drag engravers a while back. Haven't used it much as yet but the tests I did looked good whereas the 22 degree PCB engraving bit I tried just made a mess. The spring loaded engraver is also much more tolerant of uneven surfaces.
https://www.engravingbit.com/Drag%20engraving%20tool.html
Kit
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.