NEMA 23 Stepper Motors

[gmurphy]

I have a lot of used NEMA 23 stepper motors in good working condition.
These are Automation Direct Sure Step STP-MTR-23079 Stepper Motors (https://www.automationdirect.com/adc/shopping/catalog/motion_control/stepper_systems/single_shaft_stepper_motors/stp-mtr-23079). 1.95Nm 1.8 deg step angle 200 steps per revolution.

I would be happy to give these motors away for free to someone in the UK (just pay postage) if they have a good use for them and are willing to send me a photo of them in use.

Please contact me for any further information or photos.

[Graham666]

Hi
Do you still have the motors? I’ve been researching upgrading my Novamill and was wondering if these may be suitable.
Regards
Graham

[gmurphy]

Hi Graham,
Yes I still have these motors. Send me an email to [email protected] to discuss.
Thanks,
Grainne

[Graham666]

Hi Grainne
I’ve sent an email but not sure if it’s getting through.
Regards
Graham

[JaviPK7]

Hi, how many are "a lot" or how many do you have left? :P thanks