PDA

View Full Version : new shed



Andybpowell
21-05-2023, 10:21 PM
The missus has allowed me another small sliver of her garden so I've built a new shed and moved my AMAT25lv into it to make space in my garage
Since I had to strip it all down to move it I also decided to do some upgrades which I've had the parts for for the last 18 mth's but have been putting off
so I've swapped out this somewhat asmatic dual core board with 8 mb ram and a conventional hard drive

31891

for this spritely I5 with 32gb ram and an ssd

31892

Also had to upgrade the power supply the old one (at the bottom) was tiny and totally inadequate the new one is borderline

31893

also changed the stepper motor psu from 600 to 1000 watts

31894

31895

hope to get it all rebuilt and working tomorrow

A_Camera
17-09-2024, 09:01 PM
Cool, but I'd isolate the shed otherwise, at least here, it would be useless most of the time. Too hot during summer and too cold during the winter season.

Lee Roberts
18-09-2024, 10:47 PM
Nice usable space it looks to me :) !

Yes I think some 25mm celotex could be helpful as mentioned by camera...

A_Camera
19-09-2024, 06:03 PM
Nice usable space it looks to me :) !

Yes I think some 25mm celotex could be helpful as mentioned by camera...

Nothing less than 95mm for me... That is, walls minimum 95mm, roof minimum 200mm. But not everyone have the same needs as I have.