View Full Version : BUILD LOG: Roland MDX Z Up Position problem

10-09-2023, 09:07 PM

I have an old Roland MDX15 engraving machine. I use DR. Engrave software.

When I set up parameters:

Z Up Position 5mm
Z Down Position -40mm
Z Engraving Pitch 40mm

I don't understand why my Z Up Position values don't work. When machine makes idle moves it raises the z-axis slider to the maximum height. What am i doing wrong?

Video: https://gemoo.com/tools/upload-video/share/559564181885976576?codeId=M031pL0nV5WaZ&card=559564178002051072

Thank you for your help!31967