Printable View
I have just purchased a Denford microrouter that is fully encased, it is fitted with a dust shoe and hose to the side of the cabinet, the hole for the extractor hose is approx 34mm, most extractors have a 100mm hose, on my extractor I have an adapter for a 40mm hose I used as a vacuum to clean up but it reduced the suction considerably, could someone point me to an extractor that would suit the router please. Regards Mike.
works a treat with the microrouter
https://www.screwfix.com/p/scheppach...240v/15408#_=p
I was looking at this extractor but which end do you reduce the hose from 100mm to 32mm or will it not make a difference. Also could you tell me what the parts are in photo, I’m assuming they are to hold down a waste board, seems like something is missing.Attachment 29942
no idea what the yellow things are.Quote:
Originally Posted by Edendale
the black aluminium bars, of which there should be three are for resting the spool board on
Great thanks for that information, I have to try and find another one, ��
just get some u bar off ebay and make one.Quote:
Originally Posted by Edendale
Good idea Thankyou ��